master controller
英 [ˈmɑːstə(r) kənˈtrəʊlə(r)]
美 [ˈmæstər kənˈtroʊlər]
主控制器；操纵员（加遥控装置的）
双语例句
- The master controller should be opened up and examined.
应该打开并检查主令控制器。 - The proposed control structure consists of a slave system and a master controller.
控制系统包括主控制器和从系统两部分。 - The CAN subnets are coordinated by a master controller that also provides the gateway to the main CAN bus.
CAN子网由一个主控制器协调，该主控制器也为主CAN总线提供网关。 - Automatic straight air brake electropneumatic master controller
自动直通空气制动机电动气动制动主控制器 - Master controller is constructed of shell and explosion-proof components.
主令控制器由外壳和防爆元件等组合而成。 - Application of intelligent master controller in control of converter oxygen lance
智能主令控制器在转炉氧枪控制中的应用 - Electropneumatic braking connector electropneumatic master controller
电动气动制动主控制器 - The open platform and modular design enable the testing system to be applied to the R& D of master controller for various types of powertrain.
由于试验系统开放的平台和模块化的设计，使之可以应用到各种类型动力总成主控制器的开发研究中。 - After analyzed master controller, the design plan was set, which selected USB device chip embedded MCU and logic control chip. This paper introduced the function and implement of USB interface and A/ D circuit.
通过对主手控制器进行分析，确定了设计方案，选用内嵌微处理器的USB设备芯片加逻辑控制芯片进行硬件电路设计，介绍了USB接口电路和数模转换电路的作用与实现。 - This paper introduces an auto detecting system of master controller based on single chip microcontroller, and analyzes its test parameters, structure, function, as well as its hard ware components.
通过对司机控制器试验参数的分析，介绍用单片机实现的司机控制器试验参数全自动测试系统，并详细地分析了该系统的结构、硬件组成及系统功能。 - Experiment results prove our JTAG master core and PCI-1149.1 Boundary-Scan Master Controller are correct.
目前PCI-1149.1边界扫描主控器已应用于边界扫描测试系统中，经实验验证了整个设计的正确性。 - A protocol named master controller election and hot swap ( MES) was designed, and the linear temporal logic ( MPTL) was employed to formally describe the MES protocol, the conformance of this protocol was proved by using logical calculus.
在控制子系统中设计了一种主控制器选举和热切换（MES）协议，并使用线性时序逻辑（MPTL）对MES协议进行了形式化描述，通过逻辑演算证明了该协议的一致性。 - In the software design for the master controller, we give a demonstration to establish the configuration table.
在主控制器的软件设计中，对组态表的建立进行了示例说明，并对程序模块化的设计思想进行了说明； - The master controller and customer multi-functional gas meter realize communication through telephone network automatically.
整个系统由主控端和客户多功能煤气表端组成，主控端与客户端通过电话线网实现自动抄表。 - The paper mainly expatiates the realization of hardware and software of the master controller.
论文重点论述了主控制器的硬件和软件的实现。 - The interface circuits include the PCI interface of the master controller, the interface of A/ D converter and interface ( HPI) of the association processor.
接口电路又包括与主控制器的PCI接口，与A/D转换器的接口和与协处理器的接口（HPI）。 - We developed the VXI bus interface with master controller and a parallel DSP processing module. The design, tools and method of software for the parallel DSP system are studied in detail.
完成了具有主控功能的VXI总线接口设计，最终成功开发了基于VXI总线的并并行DSP模块。 - The composition and functions of intelligent master controller based on S7-200 PLC are introduced, the software design idea to realize displacement measuring with PLC is analyzed, the application fields of this controller stated.
介绍了以S7-200PLC为核心的智能主令控制器的组成和功能，并对用PLC实现位移检测与软件设计思想进了分析与说明，给出了智能主令控制器的应用领域。 - The device driver of master controller is developed on Windows Linux DOS Operating System in this paper.
本论文开发了在Windows、Linux和DOS三种操作系统的主手控制器的驱动软件。 - This system adopts serial bus structure. It consists of voltage and temperature probe, embedded controller and master controller.
系统采用了串行总线结构，由电压温度探头、嵌入式控制器和主控制器组成，实现了全数字化测试。 - After analyzed USB theory, Software drivers of master controller include device firmware, device driver and USB system software.
经过分析USB通信原理，主手控制器软件驱动程序包括设备固件、设备驱动程序和USB系统软件三部分。 - The DSP/ FPGA control card as master controller realizes control algorithm and trajectory planning.
作为主控制器DSP/FPGA控制卡完成手指的轨迹规划和控制算法，机器人的这种分级控制结构满足实时控制和力学特性测量精度的要求。 - The safety monitoring and data recording system for tower crane combined sensor technology, field bus technology and safety evaluation technology, which was composed of the master controller and data collection nodes.
塔吊安全监测记录系统融合了传感器技术、现场总线技术和安全评价等技术，由主控制器和各个数据采集节点构成。 - In order to improve reliability of the entire system, fault-tolerant technique is used in master controller module.
为了提高整个系统的可靠性，主控模块采用容错技术，具体方法是为主控模块增加冗余部分，实现主控模块和冗余部分的双机热备用。 - TI DSP is used as the master controller for data processing, store and transfer.
以TMS320F2812为主控制器，实现对数据的处理，存储和通信的功能。 - In the design, ARM is the master controller to control the whole system, while FPGA is the coprocessor, mainly to complete the high-speed signal acquisition and real-time processing.
ARM作为主控制器，对整个系统进行控制，FPGA作为协处理器，主要完成了信号的高速采集与实时处理。 - The process conditions and the requirements for controlled heat-supply network are analyzed in detail. Depending on the comparison of the controller and the realities of the engineering situation, the PLC system of Siemens is selected as the master controller of the heat exchange station.
详细分析被控热网的工艺条件和控制要求，根据热网的工艺特点和系统要求，通过对控制设备的比较及工程实际调研情况，选择用西门子公司的PLC设备作为热交换站主控制器。 - FCS consists of master controller module and intelligent measuring and controlling modules.
现场控制站由主控模块和智能测控模板组成。 - Via AT commands, you can complete the interaction between the master controller and the slave.
通过AT命令，可以完成主控制机和被控制机之间的控制与被控制互动。 - Intelligent monitoring mode comprises the module of master controller and sub-modules.
其中智能测控节点又包括主控制器模块和功能子模块。